Table of Contents
Advertisement
Setup Instructions
Setup Instructions
Setup instructions
Setup instructions
Discharge plug installation: HRU19DPU, HRU196DPU & HRU197DPU
Discharge plug installation: HRU19DPU, HRU196DPU & HRU197DPU
1. Ensure engine is stopped.
1. Ensure engine is stopped.
2. Raise discharge guard and insert discharge plug at the base of the rear chute.
2. Raise discharge guard and insert discharge plug at the base of the rear chute.
3. Close discharge guard and ensure tabs protrude from discharge guard on 19" models.
3. Close discharge guard and ensure tabs protrude from discharge guard on 19" models.
DISCHARGE GUARD
DISCHARGE GUARD
DISCHARGE PLUG
DISCHARGE PLUG
Discharge plug installation: HRU216DSU, HRU217DSU
Discharge plug installation: HRU216DSU, HRU217DSU
Mower handle assembly
Mower handle assembly
HRU216SU, HRU216DSU, HRU217DPU
HRU216SU, HRU216DSU, HRU217DPU
The handle assembly comes in 2 sections (upper and lower). The upper section has the
The handle assembly comes in 2 sections (upper and lower). The upper section has the
controls and cables already fixed to it. The lower section is fitted to the mower first with
controls and cables already fixed to it. The lower section is fitted to the mower first with
the long bolt and locking screws. The upper section is then fitted to the lower using the
the long bolt and locking screws. The upper section is then fitted to the lower using the
shorter bolts and locking screws.
shorter bolts and locking screws.
Take care to route the cables as per the diagram below.
Take care to route the cables as per the diagram below.
NOTE:
NOTE:
HRU217DPU is a push mower, hence
HRU217DPU is a push mower, hence
no clutch cable is present.
no clutch cable is present.
LOCKING SCREWS
LOCKING SCREWS
DISCHARGE PLUG
DISCHARGE PLUG
TABS
TABS
8
8
CABLE TIES
CABLE TIES
CABLES MUST GO
CABLES MUST GO
UNDER CROSSBAR
UNDER CROSSBAR
CABLES TO THE
CABLES TO THE
OUTER SIDE OF
OUTER SIDE OF
THE BAR
THE BAR
Hide quick links:
Advertisement
Table of Contents
