Using The Analog Controller - Sony SCPH-39004 Instruction Manual

When not intending to play a game for an
extended period of time
Turn the power off at the MAIN POWER
switch on the back of the console, and
disconnect the power plug from the electrical
socket.
Changing from one game to
another
There is no need to turn off the console when
you want to change games.
1
Press the A button.
......
The disc tray opens.
2
Remove the disc.
......
3
Place a new disc in the disc tray.
......
4
Press the A button.
......
The disc tray closes.
5
Press the 1/RESET button briefly to reset.
......
(Warning: holding the 1/RESET button
down for any length of time may cause the
console to go into standby mode.)
After the start-up screen, screen 2 or 3
appears and the game begins.
Note
With a multi-disc game, follow steps 1 through 4 to switch
discs. Refer to the software manual for details.

Using the Analog Controller

Differences between the Analog
Controller (DUALSHOCK
Analog Controller (DUALSHOCK
1 Analog Controller (DUALSHOCK
(supplied / sold separately)
•The Analog Controller (DUALSHOCK
be used with PlayStation 2 and PlayStation
®
format software.
•You can switch between digital and analog
modes. When the controller is in analog
mode, the following buttons and sticks may
operate in analog fashion depending on the
features supported by the software title. Refer
to the software manual for details.
PlayStation 2 format software
®
Directional buttons / ¢ , a , ✕ , s buttons /
left analog stick / right analog stick / L1, R1,
L2, R2 buttons
PlayStation format software
®
Left analog stick / right analog stick
•You can enjoy the vibration function.
2 Analog Controller (DUALSHOCK
(sold separately)
•The Analog Controller (DUALSHOCK
be used with PlayStation 2 and PlayStation
®
format software.
Digital mode (indicator: off)
5
L2 button
1,4
L1 button
SELECT
button
2,3
Directional
buttons
ANALOG mode button
•You can switch between digital and analog
modes. When in analog mode, you can enjoy
2) and
® the analog operation of the left analog stick
) and right analog stick.
®
PlayStation 2 format software
®
2)
® Left analog stick / right analog stick
PlayStation format software
®
2) can Left analog stick / right analog stick
®
•You can enjoy the vibration function.
®
Mode switching and the mode
indicator
The Analog Controller (DUALSHOCK
Analog Controller (DUALSHOCK
switched between digital mode and analog
mode by pressing the ANALOG mode button.
Each time the ANALOG mode button is
pressed, the mode changes as follows:
Digital mode (indicator: off)
Xx
Analog mode (indicator: red)
Note
Switch to the appropriate mode for use.
)
®
Note however, that some software will make this
adjustment automatically. In such cases, the ANALOG
mode button is overridden by the software. For details,
) can
®
refer to the software manual.
®
R2 button
R1 button
START
button
¢ button
a button
✕ button
s button
Digital mode
(indicator: off)
Vibration function
The Analog Controller (DUALSHOCK
Analog Controller (DUALSHOCK
feature a vibration function when the function
is supported by the software title. The vibration
function can be set to ON or OFF on the
software option screen.
Notes
• When the Analog Controller (DUALSHOCK
Analog Controller (DUALSHOCK
turn the console off or unplug the controller from the
console.
• Before using the vibration function, please read "Notes
2) and
on safety when using the Analog Controller
®
(DUALSHOCK
) can be ®
®
(DUALSHOCK
®
Before using the Analog
Controller (DUALSHOCK
Analog Controller (DUALSHOCK
After turning the console on, rotate the left and
right analog sticks once with your thumbs before
starting a game. Do not twist the sticks but rotate
as if drawing a circle (see diagram above).
Analog mode (indicator: red)
L2 button
L1 button
SELECT START
button button
Directional
buttons
Left analog stick /
L3 button*
ANALOG mode button
* The R3 button and the L3 button function when the stick is pressed.
9
GB
2) and
®
) both
®
2) and
®
) is not being used,
®
2) and Analog Controller
)" on page 2.
2) and
®
)
®
R2 button
R1 button
¢ button
a button
✕ button
s button
Right analog stick /
R3 button*
Analog mode
(indicator: red)