Advertisement
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
1. Remove the rubber and use the allen screwdriver to unlock the column and hinge, then pull out the stand form the
monitor head.
2. Separate the RC form the monitor head through the tear down slots which on the bottom side.
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at
EL-MF877-01
Page 3
Advertisement
