Sony ILCE-7RM4 Ftp Help Manual page 9

FTP Help Guide
Registering an FTP server
You can register FTP servers for FTP transfers to the camera. Up to nine FTP servers can be registered. As an example,
the method for registering [Server 1] is described here.
MENU → (Network) → [FTP Transfer Func.] → [Server Setting] → [Server 1].
1
Select each setting item and then input the setting value for Server 1.
2
Input each item using the software keyboard and then select [OK]. For details on how to input using the
software keyboard, see the "Help Guide" for the camera.
Menu item details
Display Name:
Input a name for the FTP server to be registered.
Destination Settings:
Configure the following items for the FTP server:
Host Name: The host name or IP address of the server
Secure Protocol: Set whether or not to execute secure FTP transfers
Root Certificate Error: Normally it is recommended to set [Does Not Connect]. If a certificate error is displayed,
update the root certificate and connect with the correct authentication.
Port: The port number of the FTP server
Directory Settings:
Set the destination folder on the FTP server.
Specify Directory: Set the destination folder.
For example, when "aaa" is specified as the destination folder name, jpeg files are transferred in the manner of
C:\interpub\ftproot\aaa\DSC00001.jpg.
When the folder is not specified, jpeg files are transferred to directly below the user folder in the manner of
C:\interpub\ftproot\DSC00001.jpg.
Directory Hierarchy:
[Standard]: Files are transferred to the folder set by [Specify Directory].
[Same as in Camera]: The folder configuration is the same as that of the memory card inserted into the camera.
If the camera has two memory slots, destination folder name is "A" for Slot 1 and "B" for Slot 2.
Example: C:\interpub\ftproot\A\DCIM\100MSDCF\DSC00001.jpg
Same File Name: When there is a file with the same name at the destination, set whether to overwrite the file. When
[Does Not Overwrite] is set and there is a file with the same name at the destination, an underscore and a number
are added to the end of the file name. (Example: DSC00001_1.jpg)
User Info Settings:
Input a [User] and [Password] to log on to the FTP server.
To select the server to be used for transfer
MENU → (Network) → [FTP Transfer Func.] → [Server Setting] → desired server.
Note
9