Sony ILCE-7RM4 Ftp Help Manual page 50

FTP Help Guide
Registering an FTP server
You can register FTP servers for FTP transfers to the camera. Up to three FTP servers can be registered. As an
example, the method for registering [FTP Server 1] is described here.
MENU → (Network) → [FTP Transfer Func.] → [FTP Server 1].
1
The setting screen for FTP Server 1 will appear.
Select each setting item and then input the setting value for FTP Server 1.
2
Input each item using the software keyboard and then select [OK].
Menu item details
Display Name:
Input a name for the FTP server to be registered.
Destination Settings:
Configure the following items for the FTP server:
Host Name: The host name or IP address of the server
Secure Protocol: Set whether or not to execute secure FTP transfers
Port: The port number of the FTP server
Directory: The destination folder name
User Info Settings:
Input a user name and password to log on to the FTP server.
About the destination folder
The destination folder configuration is as follows.
Example:
When "aaa" is specified as the destination folder name
C:\interpub\ftproot\aaa\ILCE9-_xxxxxxx\hhmmss\DCIM\100MSDCF\
When the destination folder name is not specified
C:\interpub\ftproot\yyyy-mm-dd\ILCE9-_xxxxxxx\hhmmss\DCIM\100MSDCF\
interpub\ftproot: Destination folder name set by the FTP server side
aaa: Folder name specified by the camera
ILCE9-xxxxxx: Model name and serial number
hhmmss: Transfer time
DCIM\100MSDCF: Name of the transfer source folder inside the camera
yyyy-mm-dd: Transfer date
Even if an image with the same file name is transmitted again, the image will be transferred to another folder with a
different transfer time, so the image will not be overwritten.
Hint
For details on how to input using the software keyboard, see the "Help Guide" for the camera.
Note
50