Sony ILCE-7RM4 Ftp Help Manual page 14

FTP Help Guide
Transferring images in a batch
You can specify the target transfer range, such as protected images or non-transferred images, and transfer only the
necessary images together as a batch. Set MENU →
advance.
MENU → (Playback) → [Select PB Media] → desired slot.
1
MENU → (Network) → [FTP Transfer Func.] → [FTP Transfer].
2
Specify the FTP transfer target.
3
Target range: Select from [This Media] or [This Date] (in case of Date View)/[This Folder] (in case of Folder
View).
Target images: Select from [All] or [Only Protected Img.].
Transfer status: Select from [All] or [Only Non-transfer]* or [Only Failed Transfer].
* [Only Non-transfer] also includes images for which transfer failed.
Select [OK] and press the center of the control wheel.
4
Select [OK] and press the center.
5
Image transfer starts.
Image transfer status
You can check the image transfer status on the playback screen.
:
FTP transfer underway
:
FTP transfer complete
:
FTP transfer failed
Note
You cannot select the next image to be transferred while image transfer is underway.
When [Recover Image DB] is executed, all transfer statuses for that slot are cleared.
(Network) → [FTP Transfer Func.] → [FTP Function] to [On] in
C-484-100-16(1) Copyright 2017 Sony Corporation
14