Sony ILCE-7RM4 Ftp Help Manual page 24

Hide thumbs Also See for ILCE-7RM4:

FTP Help Guide

About LAN connection

You can communicate with an FTP server by connecting the camera to a network via a commercially available LAN

cable (only if the model supports wired LAN) or wireless LAN. You can then transfer images to the FTP server by

operating the camera.

Note

The wireless access point or wireless router that relays the LAN connection is referred to as the "access point" in this manual.

Basic knowledge of FTP servers is required to use the FTP transfer function.

The explanations in this manual are based on the assumption that your network or FTP server environment is ready to use. For

information on how to prepare the network environment, check with the manufacturer of each device.

For details on the camera's operations, see the "Help Guide" for the camera.

If your camera is lost or stolen, Sony bears no responsibility for the loss or damage caused by illegal access or use of the

registered access point on the camera.

Always make sure that you are using a secure wireless LAN to avoid hacking, access by malicious third parties, or other

vulnerabilities.

It is important that you set the security settings when using a wireless LAN. If a security problem arises because no security

precautions are in place or due to any inevitable circumstances when using a wireless LAN, Sony bears no responsibility for the

loss or damage.

Table of Contents

Troubleshooting