Sony ILCE-7RM4 Ftp Help Manual page 54

FTP Help Guide
Transferring images to an FTP server
You can transfer images to the selected FTP server. Configure the settings for the FTP server setting and the
wired/wireless LAN in advance.
MENU →
(Playback) → [Select PB Media] → desired slot.
1
Set the camera to playback mode.
2
MENU → (Network) → [FTP Transfer Func.] → [FTP Transfer] → Select the network connection method.
3
The connection will start when you select the network connection method.
Once a connection to the FTP server has been established, the image selection screen will appear.
Select the images to transfer and then select MENU → [OK].
4
The image transfer will start when you select [OK].
To cancel the transfer, select [Cancel].
To continue transferring other images, select [OK] on the completion screen.
5
The camera will go back to Step 4.
Hint
If connecting via a wired LAN, see the "Help Guide" for the camera for the location of the terminal.
If connecting via a wireless LAN, make sure that you are near the registered access point.
Note
You can only transfer still images recorded by the camera using FTP.
Do not remove the memory card from the camera during transfer operations.
You can only use a wired LAN connection when [Airplane Mode] is set to [On].
C-484-100-16(1) Copyright 2017 Sony Corporation
54