DirecTV A3-KaKu HD Installation Training, Process And Set Up page 31

Aiming and Fine-tuning the ODU (cont)
• Fine-tuning the Azimuth (Cont)
• You can damage the mount if threads bottom out and you
keep turning the fine-tune screws.
• Strive for IDENTICAL levels between the left and right dither
stops.
• Give the meter enough time to stabilize the readings at each
dither stop.
• Move to the left and right dither stop by grasping the rear of
the mount, do not use the reflector/ODU.
Confidential & Proprietary