DirecTV A3-KaKu HD Installation Training, Process And Set Up page 30

Aiming and Fine-tuning the ODU (cont)
• Fine-tuning the Azimuth (Cont.)
• Tighten the Azimuth lock down bolts.
• the current signal level should now be equal to or
greater than what was recorded for coarse
alignment. A lower level would indicate a possible
alignment problem and will require repeating the
Fine-tune steps.
• Verify adequate signal levels are available for
101°, 103°, 110°, and 119° using the signal meter
in the H20 IRD.
– If they are low, repeat the Fine-tuning steps
Confidential & Proprietary