DirecTV A3-KaKu HD Installation Training, Process And Set Up page 15

Ka/Ku ODU Installation Procedures
• Attach the pre-assembled ODU to the AZ/EL hardware.
• Slide the AZ/EL and ODU hardware onto the installed mast, and
tighten the mast clamp bolts just enough so the antenna has
only side-to-side movement for later Azimuth alignment.
• Run all necessary cables into the feed arm
• Assemble the LNB's using the provided hardware
• Refer to the included LNB Zone chart for correct settings for
attaching the 110° and 119° LNB's to the 99°, 101°, and 103° LNB's
• Zone 1 will have the 110° and 119° LNB's closest to the 99°, 101°,
and 103° LNB's
• Zone 3 will have the 110° and 119° LNB's furthest apart from the
99°, 101°, and 103° LNB's
• Zone 2 will have the 110° and 119° LNB's in the middle setting
Confidential & Proprietary