Controlling Other Tvs With The Remote Commander - Sony SLV-SE350K Operating Instructions Manual

Sony video cassette recorder operating instructions
Table of Contents

Advertisement

To
Adjust the volume of the TV
Switch to TV (Teletext off)*
Switch to Teletext*
Select the sound
Use FASTEXT*
Call up the on-screen display
Change the Teletext page*
Switch to/from wide mode of a Sony wide TV (For
other manufactures' wide TVs, see "Controlling other
TVs with the remote commander (not available on SLV-
SE350K and SE600N)" below.)
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
* not available on SLV-SE350K and SE600N

Controlling other TVs with the remote commander

(not available on SLV-SE350K and SE600N)
The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the following table, set the appropriate manufacturer's code number.
Set [TV] / [VIDEO] at the top of the remote commander to [TV].
1
Hold down ?/1, and enter your TV's code number using the programme number
2
buttons. Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, t TV/VIDEO, programme number buttons, –/– – (ten's digit), PROG +/–,
2 +/–, a (TV), / (Teletext), FASTEXT buttons, WIDE*, MENU*,
,
*, and OK*.
* These buttons may not work with all TVs.
Press
2 +/–
a (TV)
/ (Teletext)
AUDIO MONITOR
FASTEXT buttons
DISPLAY
c/C
WIDE
continued
Setting up the remote commander
M
m
<
/
/
/
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents