Not Available On Slv-Se500R - Sony SLV-SE350K Operating Instructions Manual

1
TIMER
PLAY
OK
2
1 2
4 5
7 8
0
CLEAR
3
PLAY
OK
INPUT SELECT
CLEAR
54
Recording TV programmes using the ShowView system (not available on SLV-SE500R, SE600N and
SE700R)
Press TIMER.
• When you set TIMER OPTIONS to
VARIABLE:
The TIMER METHOD menu appears
on the TV screen. Press M/m to select
SHOWVIEW, then press OK.
• When you set TIMER OPTIONS to
SHOWVIEW:
The SHOWVIEW menu appears on the
TV screen.
Press the programme number buttons to
3
enter the ShowView number.
6
9
If you make a mistake, press CLEAR and
re-enter the correct number.
Press OK.
The date, start and stop times, programme
position or station name, tape speed, and
VPS/PDC setting appear on the TV screen.
• If "– –" appears in the "PROG."
(programme) column (this may happen
for local broadcasts), you have to set the
appropriate programme position
manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line in the
"PROG." position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
TIMER METHOD
STANDARD
SHOWVIEW
SELECT :
SET : OK
EXIT :
SHOWVIEW
2 8 . 9
SHOWVIEW NO.
– – – – – – – – –
SET : 0–9
EXIT :
SHOWVIEW
2 8 . 9
SHOWVIEW NO.
1 2 4 6 – – – – –
SET : 0–9
CONFIRM : OK
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME PROG.
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
MENU
THU
MENU
THU
MENU
THU
3 5
ON
MENU