Emc Statement - inventum BDA632 Instruction Manual

E2E4: there was shaking while
measuring
The systolic pressure value or diastolic
pressure value is too high.
The systolic pressure value or diastolic
pressure value is too low.
12

EMC statement

a. A statement to the effect that this equipment needs to be installed and put into service in accordance with the information provided in
the user manual; and
b. A statement to the effect that wireless communications equipment such as wireless home network devices, mobile phones, cordless
telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least at a distance d=3,3 m away from
the equipment. The distance d is calculated by the manufacturer from the 800 MHz to 2,5 GHz column of Table 5 or Table 6 of IEC 60601-
1-2: 2007, as appropriate
Hand or body shaking while measuring.
1. The cuff was held lower than your
heart.
2. The cuff was not attached properly.
3. You moved your body or spoke
during measurement.
1. The cuff was held higher than your
heart.
2. You moved your body or spoke
during measurement.
.
Keep static and correct gesture and measure again.
Keep correct position and gesture and measure
again.
English •
39