Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Alarm.Com ADC-ACX1
Summary of Contents for Alarm.Com ADC-ACX1
- Page 1 SMARTER ACCESS CONTROL QUICK START GUIDE...
-
Page 2: Pre-Installation Checklist
Pre-Installation Checklist Ensure your customer has an Alarm.com account with a service plan that supports Access Control. Mount and wire all system hardware according to manufacturer’s installation instructions. System hardware may include: • ADC-ACC1-17 Door Controller • Up to eight total ADC-ACX1 and ADC-ACX2 expansion modules •... -
Page 3: System Configuration
Reader to the ADC-ACC1-17 to control up to 17 readers. ADC-ACC1-17 Reader ADC-ACC1-17 Reader ADC-ACX1 Reader Reader For detailed wiring guides, please For detailed wiring guides, please see the device installation manuals. see the device installation manuals. Reader Smarter Access Control Quick Start Guide... - Page 4 Add Hardware to Alarm.com Account Repeat for all doors in the system. Controllers Check Connection Disconnect any Ethernet cables from all controllers Connect an internet-connected Ethernet cable to in the system. each controller and power up the system. Navigate to the Access Control tab on the Check the Event History on the Dealer Website to Equipment page on the Dealer Website.
- Page 5 © 2017 Alarm.com. All rights reserved. 8281 Greensboro Drive, Suite 100 Tysons, VA 22102 171011...
Need help?
Do you have a question about the ADC-ACX1 and is the answer not in the manual?
Questions and answers
HID is beeping
The Alarm.com ADC-ACX1 may be beeping because it is waiting for application firmware to be downloaded. The A LED would blink with a pattern of 0.1 seconds ON and 0.1 seconds OFF in this state.
This answer is automatically generated