Configuration Procedure - H3C S3100-52P Operation Manual

Operation Manual – QoS
H3C S3100-52P Ethernet Switch

1.7.2 Configuration Procedure

Table 1-10 Configure queue scheduling in system view
Operation
Enter system view
Configure the queue
scheduling mode
Display
queue-scheduling
mode
parameters
switch
Table 1-11 Configure queue scheduling in Ethernet port view
Operation
Enter system view
Enter
port view
Configure
queue scheduling
mode
system-view
queue-scheduler
{ strict-priority
queue0-weight
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight }
the
and related
display queue-scheduler
on the
system-view
Ethernet interface
interface-number
queue-scheduler
the queue0-weight queue1-weight
queue2-weight queue3-weight
queue4-weight queue5-weight
queue6-weight queue7-weight
Command
| wrr
Command
interface-type
wrr
1-13
Chapter 1 QoS Configuration
Description
—
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values
1:2:3:4:5:9:13:15.
Optional
You can execute
display command in any
view.
Description
—
—
Required
In WRR mode, if the weight
value of one or more
queues is set to 0, SP
algorithm is used for this or
these queues
By default, all the outbound
queues on the port adopt
the WRR queue scheduling
algorithm and their default
weight values
1:2:3:4:5:9:13:15.
are
the
are