Troubleshooting - IKEA LAGAN Manual

ENGLISH
General information
Warning! Switch the appliance
off and let it cool down before
you clean it.
Warning! Do not clean the
appliance with steam blasters or
high-pressure cleaners.
Warning! Do not use abrasive
cleaners, steel wool pads or
acids. They damage the
appliance.
To remove any food remains, wash the
enamelled elements, caps and crowns, with
warm soapy water.
Wash stainless steel elements with water,
and dry with a soft cloth.
This model is equipped with an electrical
ignition. To avoid problems with lightning,

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
There is no spark when light-
ning the gas.
The flame is extinguishes im-
mediately after lightning.
keep the ceramic "candle" with electrode
clean.
After cleaning, be sure to wipe dry with a
soft cloth.
Possible cause
There is no electrical supply.
There is no electrical supply.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated
enough.
Do not put the pan supports in a
dishwasher. Wash them
manually and dry with a soft
cloth. After cleaning, make sure
that the pan supports are in
correct position.
To check the conditions of the
gas supply pipe and the pressure
adjuster, contact the After Sales
Service Provider. The service is
not free of charge.
Remedy
Check if the unit is plugged
in and the electrical supply is
switched on.
Check the house electric in-
stallation fuse.
Check if the burner cap and
crown are placed correctly.
After lightning the flame,
keep the knob pushed for
about 5 seconds.
13