Additional Operations; Playing/Searching At Various Speeds; Setting The Recording Duration Time; Checking/Changing/Cancelling Timer Settings - Sony SLV-ED225 Service Manual

Additional Operations

Playing/searching at various speeds

Before you start
¥ Refer to Index to parts and controls for button locations.
Playback options Operation
During fast-forward, hold down M FF. During rewind, hold
View the picture during
down m REW.
fast-forward or rewind
¥ During playback, press M FF or m REW on the remote
Play at high speed
commander.
¥ During playback, hold down M FF or m REW. When
you release the button, normal playback resumes.
During playback, press ×2.
Play at twice the
normal speed
During playback, press y SLOW.
Play in slow motion
During pause, press M FF on the remote commander.
Play frame by frame
To resume normal playback
Press H PLAY.
48 Additional Operations
Checking/changing/cancelling timer
settings
Before you start
¥ Turn on your TV and set it to the video channel.
¥ Refer to Index to parts and controls for button locations.
1
Press ?/1 to turn on the VCR.
2
Press MENU, then press M/m/</, to highlight TIMER
PROGRAMMING and press OK.
¥ If you want to change or cancel a
setting, go on to the next step.
¥ If you do not need to change or
cancel the settings, press MENU,
then turn off the VCR to return to
recording standby.
3
Press M/m to select the setting you
want to change or cancel, then press
,.
The PR number on the selected row
flashes.
4
¥ To change the setting, press </, to select the item you want to
change, then press M/m to reset it.
¥ To cancel the setting, press CLEAR.
5
Press MENU to exit the menu.
If any settings remain, turn off the VCR to return to recording standby.
50 Additional Operations
P R DA Y ST AR T S TO P
3 5 S A 2 9 1 9 : 0 0 2 0 : 0 0
SP
2 9 S A 2 9 2 1 : 0 0 2 1 : 3 0
—
3 0 S A 6 1 2 : 0 0 1 3 : 3 0 —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
S E LE CT : SE T :
E N D : O K EX I T : ME NU
P R DA Y ST AR T S TO P
3 5 S A 2 9 1 9 : 0 0 2 0 : 0 0
SP
2 9 S A 2 9 2 1 : 0 0 2 1 : 3 0 —
3 0 S A 6 1 2 : 0 0 1 3 : 3 0 —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
— — — — — — — — : — — — — : — — —
S E LE CT : SE T :
E N D : O K EX I T : ME NU
1-12

Setting the recording duration time

After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start
¥ Refer to Index to parts and controls for button locations.
1
While recording, press z REC.
The indicator appears in the display window.
2
Press z REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:30 1:00 4:00
In LP (EP) mode
Each press advances the time as shown below.
0:30 1:00 4:00 5:00
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
¥ You cannot display the current tape time in the display window when setting the
recording duration time.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes
start at the same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
4:30 Normal recording
Normal
9:00
recording
indicator disappears and the VCR
Additional Operations 49
about 20 seconds
Additional Operations 51