Upper Control Panel - Sony HDW-F500 Operation Manual

2-1 Control Panel

2-1-1 Upper Control Panel

1DISPLAY FULL/FINE button
2PHONES jack
3POWER switch
1 DISPLAY FULL/FINE button
Changes the display range of the audio level meters.
FULL: Display range is –60 to 0 dB (peak level = 0
dB) or –40 to +20 dB (peak level = +20 dB).
Use 814. LEVEL METER SCALE in the VTR
SETUP menu to select the range.
FINE: Displays the audio level in 0.25 dB
increments. The center LED lights up in each
meter as a signal level reference. When the level
exceeds the maximum display value, the top LED
flashes. When the level falls below the minimum
display value, the bottom LED flashes.
2-2
Chapter 2 Locations and Functions of Parts and Controls
4PHONES level control
5 PB level
6REC level controls
controls
9Indicator window
!ºINPUT SELECT button
!¡AUDIO INPUT/MONITOR SELECT buttons
!™REFERENCE signal indicators
!£REMOTE buttons and RS-232C indicator
Upper control panel
7Audio level meters
DIGITAL VIDEO CASSETTE RECORDER HDW-F500
2 PHONES jack
Connects stereo headphones with 8
audio monitoring during recording, playback, and
editing. Adjust the headphone output level with the
PHONES level control.
3 POWER switch
Turns on the power. When the power is turned on, the
audio level meters and menu display in the lower
control panel light up.
8MONITOR SELECT button
impedance for