Selecting Dmc Playback (Dmc); Recalling Edit Points (Last Edit) - Sony HDW-F500 Operation Manual

4-2-8 Selecting DMC Playback
(DMC)
In DMC (Dynamic Motion Control) playback mode,
the VTR plays back a tape segment at a specified
variable speed of –1 to +2 times normal playback
speed, memorizes the speed, then plays the segment
back at a later time at the memorized speed.
DMC playback is useful during on-the-spot telecasts of
sporting events for immediate playback and broadcast
of highlight scenes for which starting and ending
points have been set during recording.
For detail on the procedure for DMC playback, see Section
5-4-4, "DMC Playback" on page 5-13.
During tape editing using two HDW-F500 VTRs, you
can use DMC playback to control the playback speed
of the player VTR for editing at variable speeds (DMC
editing).
For detail on the procedure for DMC editing, see Section
6-2-1, "Performing DMC Editing" on page 6-15.
4-2-9 Recalling Edit Points
(LAST EDIT)
While editing, you can recall the last edit points by
pressing the ALT button, then the [F10] (LAST EDIT)
button.
The edit points appear in the display.
Edit points

Recalling edit points (LAST EDIT)

4-19
Chapter 4 Menu Settings