Items In The Extended Setup Menu - Sony HDW-M2100 Operation Manual

9-4 Items in the Extended Setup Menu

9-4 Items in the Extended Setup Menu
The extended setup menu contains the following
items.
Item number Item name
101 SELECTION FOR
SEARCH DIAL ENABLE
102 MAXIMUM SPEED
103 AUDIO SELECTED LINE
OUT
104 AUDIO MUTING TIME
105 REFERENCE SYSTEM
ALARM
106 CAPSTAN LOCK
9-10
Chapter 9 Setup Menus
Menu items in the range 100 to 199, relating to the control panels
Settings
Select how the unit enters the search mode.
DIAL : Turning the search dial switches to search mode at all times except during
editing.
KEY: One of the JOG, SHUTTLE, and VAR buttons must be pressed to switch to
search mode.
Select the fast forward and rewind tape speed and also search mode speed
during tape playback.
MAX : Perform fast forward, rewind, and search mode playback at the maximum
speeds.
MX/24: Perform fast forward and rewind at the maximum speeds, and search
mode playback at up to 24 times normal speed.
MX/35: Perform fast forward and rewind at the maximum speeds, and search
mode playback at up to 35 times normal speed.
×24: Perform fast forward and rewind at 24 times normal speed, and search
mode playback at up to 24 times normal speed.
×35: Perform fast forward and rewind at 35 times normal speed, and search
mode playback at up to 35 times normal speed.
Maximum fast forward and rewind speeds
HDCAM cassette: 50 times normal speed
Maximum search mode speeds
HDCAM cassette: 50 times normal speed
Select the output signal to the MONITOR OUTPUT connectors during playback of
analog Betacam-format tape.
MANU : Output the signals selected by the audio monitor signal selection buttons
on the lower control panel.
AUTO1: Output stereo, using the AFM channels (3 and 4) for playback from
metal tape, and the LNG channels (1 and 2) for playback from oxide tape.
AUTO2: Output the signals selected by the audio monitor signal selection buttons
on the lower control panel, but during variable speed playback, if AFM is
selected, automatically switch to LNG.
Select the length of time for which audio muting occurs when the unit switches to
playback either from stopped or from still playback in the search mode.
OFF : Set the audio muting time to zero (i.e. no muting).
0.1S to 1.0S: Set the audio muting time from 0.1 second to 1.0 second, in 0.1-
second increments.
Select whether or not to display a warning when the video/audio reference signal
selected by the function menu item OUTREF, is not supplied or is out of phase
with the input video signal.
OFF: No warning.
ON : Flash the STOP button as a warning.
Select the capstan servo lock mode.
PANEL : The capstan servo lock mode is determined by the function menu item
CAPSTN.
2F: The capstan servo locks every two fields regardless of the setting of the
function menu item CAPSTN.
4F: The capstan servo locks every four fields regardless of the setting of the
function menu item CAPSTN.
8F (For 50i, 25PsF mode only): The capstan servo locks every eight fields
regardless of the setting of the function menu item CAPSTN.
Note
The setting is 2F when operating in 24PsF or 23.98PsF mode, and this item is not
displayed.
In the "Settings" column of the table, the factory
default settings are indicated by an enclosing box.
(Continued)