Searching For The Last Scene Of The Most Recent Recording (End Search); Searching For A Scene By Date Of Recording (Date Search) - Sony GV-HD700 Operating Manual

Locating a scene on the tape (Continued)
3
Press REW m 1.
The tape stops automatically when the
tape counter reaches "0:00:00".
The tape counter returns to the time
code display, and
4
Press PLAY 6.
Playback starts from the point
designated "0:00:00" on the tape
counter.
b Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• The zero set memory function will not work
correctly when there is a blank section between
recorded sections on the tape.
• During setting the zero set memory function, it
is automatically canceled when you perform the
following operations:
– Pressing MEMORY PHOTO
– Performing the end search
– Performing the index search
z Tips
• When setting [ZEROMEMORY] to ASSIGN
buttons (p. 35), you can use the zero set memory
function on the VCR without using the Remote
Commander.
To cancel the operation
Press ZERO SET MEMORY 4 again
before rewinding.
Searching for the last scene of
the most recent recording (End
search)
Press END SEARCH 8.
The last scene of the most recent recording
is played back for about 5 seconds.
32
disappears.
b Notes
• Once you eject the tape, the end search will not
function.
• The end search function does not function
correctly, if a blank section between recorded
sections on the tape is detected.
z Tips
• When setting [END SEARCH] to ASSIGN
buttons (p. 35), you can use the end search
function on the VCR without using the Remote
Commander.
Searching for a scene by date of
recording (Date search)
You can locate the point where the
recording date changes.
1
Press SEARCH SELECT 2
repeatedly to select [DATE
SEARCH].
2
Press . (previous)/> (next)
5 to select a recording date.
You can select the previous or the next
date of the present point on the tape.
Playback starts automatically from the
point where the date changes.
b Notes
• The date search functions only with the tape
recorded with date data.
• You need to record more than 2 minutes after
the date is changed. The VCR may not
accurately detect the point where the recording
date changes.
• The date search function will not function
correctly, if a blank section between recorded
sections on the tape is detected.