Sony GV-HD700 Operating Manual page 13

2
Slide the OPEN. lever and
open the LCD panel.
3
Set the POWER switch to OFF
(CHG) (The default setting).
4
Connect the AC Adaptor to the
DC IN jack on the VCR. Make sure
that the v mark on the DC plug is
facing to the v mark on the VCR.
DC IN jack
5
OPEN.
lever
POWER
switch
b Notes
• The direction to attach the L series is different
• Make sure not to come in contact with the other
• Disconnect the AC Adaptor from the DC IN
DC plug
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The POWER/CHARGE lamp turns on
orange and charging starts.
POWER/
CHARGE lamp
AC Adaptor
The POWER/CHARGE lamp turns off
when the battery pack is fully charged.
After charging the battery pack,
disconnect the AC Adaptor from the
DC IN jack on the VCR.
from that of the M series (optional) (p. 14).
Make sure to attach your battery in the correct
direction. If you attempt to attach it in the wrong
direction forcibly, a malfunction may occur.
battery terminal available for other battery packs
when charging your battery pack.
jack by holding both the VCR and the DC plug.
Power cord
(Mains lead)
To the wall outlet
(wall socket)
13
Continued ,