New Folder; File No - Sony GV-HD700 Operating Manual

Press MENU t select
• Do not attempt the following operations while
[ Erasing all data...] is on the screen:
– Operate the POWER switch/operation
buttons.
– Eject the "Memory Stick Duo."
FORMAT
You can delete all the still images on the
"Memory Stick Duo" to recover recordable
free space to allow you to write in. If you
want to format the "Memory Stick Duo,"
select [YES]
t
b Notes
• Do not attempt the following operations while
[ Formatting...] is on the screen:
– Operate the POWER switch/operation
buttons.
– Eject the "Memory Stick Duo."
• Formatting erases everything on the "Memory
Stick Duo" including protected image data and
newly created folders.
z Tips
• The "Memory Stick Duo" has been formatted at
the factory, and does not require formatting at
purchase.

FILE NO.

B SERIES
Assigns file numbers in sequence even if
the "Memory Stick Duo" is replaced with
another one. The file number is reset when
a new folder is created or the recording
folder is replaced with another.
RESET
Assigns file numbers in sequence,
following the largest file number existing
on the current "Memory Stick Duo."
62
(MEMORY SET) using V/v t press EXEC.
[YES].

NEW FOLDER

When you select [YES], you can create a
new folder (102MSDCF to 999MSDCF) on
a "Memory Stick Duo." When a folder is
full (a maximum of 9,999 still images are
stored), a new folder is automatically
created.
b Notes
• You cannot delete the created folders using the
VCR. You will have to format the "Memory
Stick Duo" (p. 62), or delete them using your
computer.
• The number of recordable still images on a
"Memory Stick Duo" may decrease as the
number of folders increases.
REC FOLDER (Recording folder)
You can select the folder to be used for
recording using V/v, then press EXEC.
z Tips
• As the default setting, still images are saved in
the 101MSDCF folder.
• Once you record a still image in a folder, the
same folder will be set as the default folder for
playback.
PB FOLDER (Playback folder)
You can select the playback folder using
V/v, then press EXEC.