Basic Operations; Playback On Your Vcr - Sony GV-HD700 Operating Manual

Basic Operations

Playback on your VCR

You can play back movies as follows.
5
2
POWER/CHARGE lamp
1
Prepare the power supply (p. 12).
2
Insert a cassette tape for
playback (p. 18).
3
While pressing the green button,
set the POWER switch to ON.
The POWER/CHARGE lamp on the
front turns on green.
4
Press PLAY N.
Playback starts.
5
Adjust the sound volume using
VOLUME/MEMORY (–/+).
6
Adjust the brightness of the LCD
screen using LCD BRIGHT (–/+).
20
6
3
1
POWER switch
Video control buttons
b Notes
• When you play back a tape recorded in the HDV
and DV formats, the picture and sound are
temporarily interrupted when the signal
switches between the HDV and DV formats.
• The tape recorded in the HDV format cannot be
played back on a video camera only compatible
with the DV format or a mini-DV player.
z Tips
• Indicators displayed on the screen during
playback are shown on page 34, 91.
• You can also adjust the brightness of the LCD
screen by setting
[LCD SET] t [BRIGHTNESS] (p. 57).
• If you adjust the brightness of the LCD screen
during recording or playback, the recorded and
original picture will not be affected.
• To play back the tape recorded on the other
VCR using an external monaural microphone
connected, see [MULTI-SOUND] (p. 60).
• When using headphones (optional), connect
headphones to the i (headphones) jack (p. 88).
To stop playback
Press STOP x.
4
(DISPLAY SET) t