KTM 390 Duke Series 2019 Owner's Manual page 49

The indicator lamps offer additional information about the operating state of the motorcycle.
When the ignition is switched on, all indicator lamps light up briefly.
Info
The malfunction indicator lamp always lights up as long as the engine is not running. If the engine is run-
ning and the malfunction indicator lamp lights up, stop (taking care not to endanger yourself or other road
users in the process) and contact an authorized KTM workshop.
The oil pressure warning lamp always lights up as long as the engine is not running. If the engine is run-
ning and the oil pressure warning lamp lights up, stop immediately (taking care not to endanger yourself or
other road users in the process) and switch off the engine.
The ABS warning lamp lights up until a speed of approx. 6 km/h (approx. 4 mph) or more has been
reached.
Possible states
The turn signal indicator lamp flashes green simultaneously with the turn signal – The turn
signal is switched on.
Malfunction indicator lamp lights up yellow – The OBD has detected an error in the vehicle
electronics. Come safely to a halt, and contact an authorized KTM workshop.
The ABS warning lamp lights up yellow – Status or error messages relating to ABS. The ABS
warning lamp flashes if the ABS mode Super Moto is enabled.
The idle indicator lamp lights up green – The transmission is in idle.
COMBINATION INSTRUMENT 7
47