Audio Dubbing (Slv-Ez77As/ Ez77Nz Only) - Sony EZ77NZ Operating Instructions Manual

Audio dubbing
(SLV-EZ77AS/
EZ77NZ only)
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT or PROG +/– to
display "L1", "L2" or "L3" in the
display window.
1
2
3
4
5
6
To stop while editing
Press the x STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 61). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is set
to ON, the AUDIO MONITOR button does not function. Remember to reset
AUDIO MIX to OFF after playing the tape.
64
Editing
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
Insert a prerecorded tape into this (recording) VCR. Search for the end
of the section to be replaced and press X PAUSE.
Make sure that the tape has its safety tab in place.
Press CLEAR to reset the counter to "0:00:00."
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
Press AUDIO DUB.
The indicator appears in the display window.
To start editing, press the X PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches "0:00:00", audio dubbing stops automatically.
1 2 3
0
CLEAR
AUDIO DUB
X PAUSE