Specifications - Sony EZ77NZ Operating Instructions Manual

Specifications

System
Channel coverage
SLV-EZ77AS/EZ66AZ (When COUNTRY is set
to AUS):
VHF AS0 to AS12, AS5A, AS9A
UHF AS28 to AS69
CATV S01 to S05, S1 to S41
SLV-EZ77NZ/EZ66AZ (When COUNTRY is set
to NZ):
VHF NZ1 to NZ11
UHF E21 to E69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels:
28 to 69 (SLV-EZ77AS/EZ66AZ)
21 to 69 (SLV-EZ77NZ)
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
LINE-1 IN (SLV-EZ77AS/EZ77NZ: SAT IN/STB IN)
or LINE-2 IN (or LINE-3 IN: SLV-EZ77AS/EZ77NZ
only)
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
LINE-2 OUT
AUDIO OUT, phono jack (2)
Standard output: 327 m Vrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
18 W (SLV-EZ77AS/EZ77NZ)
16 W (SLV-EZ66AZ)
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 97 288 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.1 kg
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 8 hours at a time
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change
without notice.
E S
®
NERGY TAR is a U.S. registered mark.
E S
®
As an NERGY TAR Partner, Sony Corporation
has determined that this product meets the
E S
NERGY TAR ® guidelines for energy efficiency.
Additional Information
69