Audio Dubbing (Slv-Se50Eg Only) - Sony SLV-SE50EG Operating Instructions Manual

Audio dubbing
(SLV-SE50EG only)
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original sound remainds
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start...
• Connect a playback source to the
LINE-2 IN AUDIO jack on the front
panel.
• Turn on the TV and set it to the video
channel.
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this
(recording) VCR. Search for the end of the section to be replaced and
press P PAUSE.
3
Press CLEAR to reset the counter to "0H00M00S."
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR enters pause mode.
P PAUSE
1 2 3
4 5 6
7 8 9
0
AUDIO DUB
CLEAR
continued
77
Editing