Setting The Timer (Dsr-30P Only) - Sony DVCAM DSR-30P Operating Instructions Manual

Setting the timer
(DSR-30P only)
Tip
To change or correct a setting
before confirming it, press
CURSOR ? to highlight the
item you want to change and
reset it.
Notes
• "TIMER" and the cassette
mark flashes in the display
window when you press
POWER with no tape
inserted.
• If you record a program
that is encoded with
copyright protection
signals, the VCR will
continue recording but the
video and audio signals
will not be recorded on
tape.
• You cannot record signals
from the DV IN jack with
the timer.
Daily/weekly recording
the current date
SUN-SAT
MON-SAT
MON-FRI
EVERY SAT
EVERY MON
EVERY SUN
one month later
(from Sunday to Saturday)
SUN-SAT
(from Monday to Saturday)
MON-SAT
(from Monday to Friday)
MON-FRI
EVERY SAT (every Saturday)
EVERY MON (every Monday)
EVERY SUN (every Sunday)
34 EN
Recording
Before you start...
Check that the clock is set to the correct time.
Insert a tape with its protect tab not slid to red. Make sure the tape is
longer than the total recording time.
Turn on your monitor and set it to the video input.
1
Press MENU. Press CURSOR >/.
to move the cursor ( ) to TIMER
SET/CHECK, then press
EXECUTE.
2
Set the date, start and stop
times, and programme
position:
1 Press CURSOR / to highlight
each item in turn.
2 Press CURSOR (>/.) to set each
item.
To correct a setting, press CURSOR ? to return to that setting
and reset.
To record a source connected to one of the inputs, select 1 or 2
in the "LINE" position.
3
Press CURSOR / to confirm
the setting.
The cursor ( ) appears in the
leftmost column.
To preset another timer setting,
move the cursor to the next line and
repeat step 2.
4
Press EXECUTE.
5
Press POWER to turn off the VCR.
"TIMER" appears in the display window and the VCR stands by
for recording.
Leave the connected equipment (recording source) switched on.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
When you set the date to start recording in step 2, press CURSOR . to
select the recording pattern. Each time you press the button, the
indication changes as shown on the left.
TIMER SET/CHECK 26.
12 THU
DATE START STOP LINE
. : :
.
: :
. : :
. : :
. : :
. : :
. : :
. : :
TIMER SET/CHECK 26.
12 THU
DATE START STOP LINE
1. 1 : :
WED
. : :
. : :
. : :
. : :
. : :
. : :
. : :
TIMER SET/CHECK 26.
12 THU
DATE START STOP LINE
1. 1 0:00 1:00 1
WED
. : :
. : :
. : :
. : :
. : :
. : :
. : :