Setting The Clock - Sony DVCAM DSR-30P Operating Instructions Manual

Setting the clock

Tip
Even if you disconnect the
AC power cord or
suspension of power occurs,
the clock works for about 30
minutes.
Before starting operation, set the clock on the "CLOCK SET" screen. The
Date and time are recorded on the tape, and you can check them by
displaying them during playback.
1
Press MENU.
The main MENU appears on the
monitor screen.
2
Press the CURSOR (>/.) buttons
to move the cursor ( ) to
CLOCK SET, then press
EXECUTE.
3
Set the date using the CURSOR
(>/.) buttons.
For DSR-30: Set the month first.
The date is shown on the
screen in the order of month/
day/year.
4
Press CURSOR / to highlight
the month and set the month
using the CURSOR (>/.)
buttons.
For DSR-30: Set the day.
5
Repeat step 4 to set the year,
and then the hour and the
minutes.
6
Press EXECUTE to start the
clock.
The CLOCK SET menu disappears
from the screen.
MENU
CLOCK SET
CASSETTE MEMORY ERASE
Y/C DELAY
SET UP MENU
: µ
SELECT
SET EXECUTE
:
CLOCK SET
1. 1. 1996 MON 0:00
SELECT : Mm
SET : µ
END : EXECUTE
(DSR-30P)
CLOCK SET
1. 1. 1997 WED 0:00
SELECT : Mm
SET : µ
END : EXECUTE
(DSR-30P)
CLOCK SET
1. 7. 1997 TUE 0:00
SELECT : Mm
SET : µ
END : EXECUTE
(DSR-30P)
(continued)
19
Getting Started
EN