Remote Commander; Inserting The Batteries - Sony DVCAM DSR-30P Operating Instructions Manual

Remote commander

(continued)
Front with cover opened
!¡
!º
9
8
7
6

Inserting the batteries

1 Open the lid at the rear.
2 Insert two size AA (R6) batteries.
Match the + and – on the
batteries to the diagram inside
the battery compartment.
EN Index to Parts and Controls
16
1 COUNTER SELECT button (14)
2 COUNTER RESET button (14)
3 PRINT button
When you connect the LANC connectors of this VCR
and a video printer, you can start printing by
pressing this button. For details, see the instruction
manual of the video printer.
1
When you use this PRINT button, set the "LANC
MODE" in the SET UP MENU to "S."
2
4 SEARCH SELECT button (27)
3
5 SEARCH =/+ button (27)
6 Buttons for MENU operation (20)
4
MENU button
CURSOR (?/>/.//) buttons
5
EXECUTE button
7 FRAME '/7 buttons (26)
8 . SLOW button (26)
9 2 button (26)
!º DISPLAY button (14)
!¡ DATA CODE button (29)
Notes
• With normal use, the batteries should last for approximately
three to six months.
• If you will not use the remote commander for an extended
period, remove the batteries to avoid possible damage from
battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries together.