Table of Contents
Advertisement
4. If you have any Model 777's that were built before August 1998, they
may have been programmed using a proprietary protocol from
Cimetrics. All Model 777's that are programmed for Modbus have a
small sticker near the 9 pin interface connector that says "Modbus".
These Model 777's have the option "11" code in the part number. If you
have a Model 777 that is not Modbus, it can be re-chipped for a nominal
fee. Please contact SymCom, Inc. at the number at the end of this
section for more information.
If you continue to have problems, please contact SymCom, Inc. at
(800)-843-8848 or (605) 348-5580
Figure 1: Typical RS-485 Network
Figure 1:
Typical RS-485 Network
Appendix
Advertisement
Table of Contents
Need help?
Do you have a question about the RS485MS-2W and is the answer not in the manual?
Questions and answers