Final Check; Maintenance; Post-Dive; Travel And Storage - Ikelite 75344 Instruction Manual

5. Tighten each thumbscrew until it stops. DO NOT over-tighten.
6. Attach the complete dome port with extension to your housing.

Final Check

1. Submerge the housing with port attached in a fresh water tank
dedicated to underwater photography equipment.
2. Visually confirm that there are no signs of water intrusion. One sign
of water intrusion is a steady stream of bubbles coming from one of
the housing's seals.

Maintenance

Post-Dive

1. Rinse the housing with dome port installed in fresh water.
2. NEVER leave your housing in the fresh water rinse tank. Collisions
with other peoples' gear can cause scratches or damage to your
equipment.
3. Dry the dome with a clean micro fiber lens cleaning cloth.
4. Attach the protective neoprene cover.
5. Stow the housing in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the housing with a towel or cloth.

Travel and Storage

1. Clean and dry the exterior of the dome port. DO NOT use any type
of glass or surface cleaner on the dome port.
2. Attach the protective front and rear neoprene covers. The neoprene
rear cover prevents dust from getting inside of the dome and is
perfect for storing your hex key, spare o-rings and thumbscrews,
instructions, and other small parts.
9