LG WP400 Owner's Manual
Signage webos box
Hide thumbs
Also See for WP400:
- Owner's manual (24 pages) ,
- Easy setup manual (8 pages) ,
- Owner's manual (124 pages)
Related Manuals for LG WP400
Summary of Contents for LG WP400
- Page 1 OWNER’S MANUAL LG Digital Signage (Signage webOS Box) Please read this manual carefully before operating your set and retain it for future reference. WP400 www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
Mounting on a wall ............13 Installing on a monitor ..........14 - HDMI connections ............16 REMOTE CONTROL ....17 USING THE WP400 SET ..... 19 - Connecting to a PC............19 - External Device Connection ........19 - Using the Input List ............19 TROUBLESHOOTING .... -
Page 3: Safety Precautions
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. - Page 4 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.
-
Page 5: Precautions To The Ac Adapter And Electrical Power
- If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock. - Page 6 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
-
Page 7: Precautions In Moving The Product
Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •... -
Page 8: Precautions In Using The Product
Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •... -
Page 9: Licenses
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. -
Page 10: Assembly And Preparation
SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website http://partner.lge.com and download the latest software for your model. How to use the ferrite core Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. -
Page 11: Parts And Buttons
Parts and Buttons The image may be different according to the model. • : Turns the power on or off. • : Displays the current signal and mode. • : Moves left and right. • : Adjusts the up and down. •... -
Page 12: Front Panel
Front Panel Rear Panel LED Indicator... -
Page 13: Installation
Installation Install the set using the screws supplied as accessories. Mounting on a wall 266.5 mm 139 mm... -
Page 14: Installing On A Monitor
Align the WP400 along the four screw holes on the rear of the set and attach it to the rear of the set using the four screws provided. - Page 15 Installation complete...
-
Page 16: Hdmi Connections
HDMI connections Use an HDMI cable to connect to the WP400. HDMI IN... -
Page 17: Remote Control
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the Signage webOS Box correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. - Page 18 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. (BACK) Allows you to move back one step in the user interaction function.
-
Page 19: Using The Wp400 Set
USING THE WP400 SET Connecting to a PC The WP400 does not include the monitor. You can connect WP400 to a monitor to view the picture on it. Your WP400 set supports the Plug and Play* feature. * Plug and Play: A PC will have a built-in driver for WP400, no extra software is needed. -
Page 20: Troubleshooting
TROUBLESHOOTING No image is displayed. Problem Resolution Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the ‘Invalid Format’ message • The signal from the PC (Graphics card) is out of the vertical or appear? horizontal frequency range of the product. - Page 21 Screen color is abnormal. Problem Resolution Screen has poor color resolution (16 • Set the number of colors to more than 24 bits (true color). Select [Control Panel] → [Display] → [Settings] → [Color Table] in Windows. colors). (The settings may differ depending on your operating system.) Screen color is unstable or mono-colored.
-
Page 22: Product Specifications
PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). Video signal Maximum resolution 3840 x 2160 @ 60 Hz - This may not be supported on some OS or graphics card types. - Page 23 Wireless module (LGSBWAC72) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range (MHz) Output power (Max.) (dBm) 2400 to 2483.5 5150 to 5725 16.5 5725 to 5850 (Not for EU) 11.5 • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
- Page 24 HDMI/ DisplayPort (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 44.772 59.855 1280 x 1024 63.981 60.02 1680 x 1050 65.29 59.954 1920 x 1080 67.5 67.5 3840 x 2160 HDMI/ DisplayPort (DTV) Support Mode...
- Page 25 Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. Temporary noise is normal when powering ON or OFF MODEL this device.
Need help?
Do you have a question about the WP400 and is the answer not in the manual?
Questions and answers