Setting The Timer; To Program The Timer - Sony RM-AX4000 Operating Instructions Manual

Setting the Timer

Up to 8 Timers can be set on the Remote
Commander (RM-AX4000). You can
program the Timer for the day of the
week, the hour, the minute and a series of
commands (a macro). You can set each
Timer to be executed or not.
To program the Timer, perform the
following procedure.

To program the Timer

1
While pressing the
COMMANDER OFF button,
press the MUTING button.
COMMANDER
OFF
MUTING
"SET" appears as the Display title.
SU
LEARN
SET
NG
PRESET LEARN MACRO
/1
TIMER
2
Press "TIMER" on the Label keys.
TIMER
"TIMER" appears as the Display title.
The Timer numbers "PROG1" -
"PROG4" flash on the Label keys.
If a page number such as "/1"
appears to the right side of Display
title, multiple pages are available.
Press the number to go to the next
page.
SU
LEARN
TIMER
NG
PROG1 PROG2 PROG3
3
Select the Timer number you
want the Remote Commander to
set the Timer by pressing the
Label key (in this case, PROG4).
PROG4
The "PROG4" appears as the Display
title.
"SU" and "12:00 AM" appear on the
Clock display.
SU
LEARN
PROG4
AM NG
ON/OFF MACRO TIME
/1
PROG4
/1
OFF
TEST
Continued
59