Setting the beep
The Remote Commander (RM-AX4000) is
preset at the factory with the
confirmation beep set to on.
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
COMMANDER
OFF
MUTING
"SET" appears as the Display title.
SU
LEARN
SET
NG
LIGHT DISPLAY OTHER
If "OTHER" does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
2
Press "OTHER"on the Label keys.
OTHER
"OTHER" appears as the Display title.
SU
LEARN
OTHER
NG
BEEP DS_TIME CLOCK
RESET
3
Press "BEEP" on the Label keys.
BEEP
The setting display for beep appears.
The current setting is shown inside
the [ ], while the other flashes.
SU
LEARN
OTHER
NG
BEEP
[ ON ] OFF
4
Press the ON or OFF key to select
the beep.
ON: Turns on the beep.
OFF: Turns off the beep.
The beep setting changes and a beep
sounds each time you press the key.
5
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
COMMANDER
OFF
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button or the COMMANDER
OFF button, the previous LCD display returns.
41