Download Print this page

Advertisement

Quick Links

How to read your Service Manual:
To identify the model of your trailer please refer to the VIN decal located on the inside of the left side frame at the front
of the trailer.
This Bundle Document Reference Sheet refers to the model identification of your trailer and the components that make
up that particular trailer. Refer to the chart below: Listed are the various components with document numbers listed. The
document number is located in the lower right-hand corner of each service manual sheet. When referencing the different
components of your trailer, please refer to the document number.
When contacting your dealer for service, please refer to the document numbers.
SLB20L
NOTE: ShoreLand'r offers their product line in either galvanized or painted finish. When ordering parts it is important
that you specify the finish or color you have on your product. The five digit number along with a two digit space _ _,
notes the parts which can be purchased with various finishes. When ordering these items use the five digit prefix and
include the following two digit suffix for proper finish.
Approximate Tongue Weight for Best Towing. Tongue weight too high, move the axle assembly forward. Tongue
weight too low, move the axle assembly backward. Tongue weight should be 5-7% of total gross weight of both boat and
trailer combined.
The law requires that the white ground wire on the both the tongue wire harness and the vehicle harness be
properly grounded to the respective trailer and vehicle frames.
Double check all nuts and bolts ---- tighten before towing.
Midwest Industries, Inc.
®
Bundle Document Reference
ROLLER
FRAME
SUBASSY
DOC#
DOC#
0002885
- - - - - -
Color Coating Reference
Suffix
00 or G
01
03 or BK
06 or AW
Tongue Weight Adjustment
Cautions/Warnings
Ida Grove, IA 51445
2X3
CHASSIS
DOC#
0002773
Finish / Color
Galvanized
Arctic White
Black
Antique White
(800)859-3028
www.shorelandr.com
WINCH ASSY
DOC#
0002760
0002766

Advertisement

loading
Need help?

Need help?

Do you have a question about the SLB20L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ShoreLand'r SLB20L

  • Page 1 SUBASSY CHASSIS WINCH ASSY DOC# DOC# DOC# DOC# SLB20L 0002885 - - - - - - 0002773 0002760 Color Coating Reference NOTE: ShoreLand’r offers their product line in either galvanized or painted finish. When ordering parts it is important that you specify the finish or color you have on your product. The five digit number along with a two digit space _ _, notes the parts which can be purchased with various finishes.
  • Page 3 ® SLB20L Final Assembly Instructions Remove the small parts from the frame by cutting the bands. Remove the bolt bag and sort all nuts and bolts by size. Tongue: Remove the tongue assembly from the frame bundle and install into the tongue channel and secure with a 1/2” X 4”...
  • Page 4 Safety Chain: would best fit your watercraft. Secure with 1/2” X 3-9/16” X 3” square u-bolts and 1/2” flange lock nuts. Insert a 3/8” X 1-1/4” hex bolt with a 3/8” flat washer and safety chain through the lower hole on the front of the Mount the adjustable bunk channel weldment to the rear tongue.
  • Page 5 ® 20 Chassis Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com 0002773...
  • Page 6 Place one of the spring bushings (Ref.#33) into the rear of the Tire Size & Carrying Capacity Chart spring bracket (Ref.#5) and secure with a 9/16” X 3-1/4” hex bolt (Ref.#6) and 9/16” hex lock nut (Ref.#17). Repeat on the other Tire Load Carrying...
  • Page 7: Winch Assembly

    ® Winch Assembly - 60602-- Secure the winch post to the tongue with three (3) 3/8” X 4” hex bolts and 3/8” flange lock nuts. Mount the winch handle to the winch using the special nut provided. Tighten the winch post in a location that best fits your water craft.
  • Page 9 ® 2X3 Long Tongue Option (S-TL) Tongue: REF# PART# DESCRIPTION 62091-- TONGUE 3X3X60 ........1 0110037 HH 3/8-16 X 1 1/4 CS GR5 ....... 2 Remove the tongue assembly from the frame bundle and 0110114 HH 1/2-13 X 4 CS GR5 ......1 install into the tongue channel and secure with a 1/2”...
  • Page 10 2X3 Long Tongue W/Brakes Option (S-TL) REF# PART# DESCRIPTION Actuator & Safety Chain: 61214 BRAKELINE ASSY 88IN ......1 Slide the actuator (Ref.#10) into the actuator housing unit 62091-- TONGUE 3X3X60 ........1 65595-- OUTER HOUSING - UFP ACTUATOR ... 1 (Ref.#3) and secure with two pins and snap rings provided 0110114 HH 1/2-13 X 4 CS GR5 ......