Resilient seated gate valves with iso fitting for pe pipe (9 pages)
Summary of Contents for Jafar 1350
Page 1
(ANTICONTAMINATION) CHECK VALVES 1350 Approved for use by President of Factory, JAFAR S.A. Failure to comply with the guidelines and instructions in this Operation and Maintenance Manual releases the manufacturer from all obligations, liability and guarantee. Due to continuous business development, we reserve the right to introduce modifications and design changes to the presented product.
Type BA reduced pressure zone antipollution (anticontamination) check valves. 1.2 USE The P/N 1350 type BA low-pressure antipollution (anticontamination) check valves are intended for protecting building water supply systems from contamination backflow within the pressure range from 0.05 MPa to 1.6 MPa and temperatures up to +70ºC.
2 DESIGN 2.1 DESCRIPTION OF THE VALVE DESIGN The Type BA antipollution check valves supplied by F.A. JAFAR S.A. are flanged valves. The antipollution check valve is designed with a cast iron tubular body, a valve cover and two poppet valve units, which form the valve closing components, and a membrane drain valve.
Page 5
OPERATION AND MAINTENANCE MANUAL 01-2016...
- maximum operating temperature, acc. to PN-89/H-02650. 2.6 PRODUCTION AND ACCEPTANCE The Type BA P/N 1350 antipollution valves are manufactured and accepted in accordance with: PN-EN 1074-3:2002 (Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Check valves) and PN-EN 12266-1:2007 (Industrial valves. Testing of metallic valves). All valves are leak tested (100%).
2.7 MARKINGS The valve marking meets the following standards: PN-EN 19: 2005, PN-EN-1074-1: 2002. The antipollution valve bodies feature markings on the front and back walls of the body. The marking contains the following data: - valve type (defined by the product reference standard number) - nominal diameter - nominal pressure - body material type...
4 ASSEMBLY AND INSTALLATION 4.1 ASSEMBLY GUIDELINES The Type BA P/N cast-iron flanged antipollution check valves can be installed in overground pipelines in horizontal orientation as shown in the following figure. The flanged valves are designed for installation between flanged pipe connections of a matching size.
The assembly method for the anticontamination valve is shown in the following figure: 4.3 OPERATION The antipollution check valves shall be operated according to the requirements for check valves, in the orientation shown in the recommended installation orientation diagram. It is recommended to periodically purge the valve with fresh water (once a year) to assure full performance.