To Set Weight Unit; Optional Normal Weighing Mode (Bypassing Parameter Setting); Auto Step On Weighing - Fakir Hercules Manual

GB

To Set Weight Unit

At the bottom of scale,you
can find a unit conversion
button as shown in picture.
If your scale is available (or applicable) in kg/lb/st, you can set to the one you prefer
by pressing the unit conversion button. Press the unit conversion button when scale
is power off, LCD shows current weight unit. Press the button again to convert weight
unit.
After selecting the prefered unit, the scale will be auto-off after 3 seconds. Selected
weight unit will be activated when the scale is turned on again.
* When setting lb/st as weight unit, the default height unit is feet/inch;
* When setting kg as weight unit, the default height unit is cm.
Remark: The unit system of scale depends on sales destination or the requirement of
distributor.

Optional Normal Weighing Mode (bypassing parameter setting)

1. Auto step on weighing

Install battery (please
refer to Page 2), and
place the scale on
flat floor
HERCULES
KG-Kilogram
LB-Pound
ST-Stone
Step on the
weighing
platform
Display your weight
Basınız
Basınız
20
Basınız
Digits flash,
stabilized and locked