To Convert Weight Unit; Normal Weighing Mode (Bypassing Parameter Setting) - Fakir SUN Manual

GB

To Convert Weight Unit

If the scale is with both measuring system of Metric(kilograms) and Imperial (pounds,
stones), you can convert weight unit as follow:
Battery
Cover
Unit switch
Unit button

Normal Weighing Mode (bypassing parameter setting)

l. Auto step on weighing
After installing battery, place the scale on flat floor. Keep stand still on scale when
testing. Then wait for seconds, display shows the same weight reading for approximate
a few seconds.
Install battery and place
the scale on flat floor.
To make sure accuracy,
place the scale on a
hard, flat floor and
avoid carpet and soft
surface.
SUN
Condition 1: if the unit switch is on the back of the scale,
A. Find unit switch on the back of scale.
B. Pull up and down the unit switch to convert scale
unit between kg-lb-st.
Condition 2: if the unit switch is on the back of the scale,
A. Find unit switch on the back of scale.
B. Press the unit conversion button when scale
is power on, LCD shows current weight unit.
Press the button again to convert weight unit.
Step on scale slightly
(Auto-on) for a while,
wait for weight reading
display(as shown
above).
24
Reading result will flash
after weight stabilized.