Dlr Series Charger Led Indicators - Motorola DLR1060 User Manual

English
2 Insert the power cord plug into the MUC dual pin
connector at the bottom of the MUC.
3 Plug the power cord into an AC outlet.
4 Turn off the radio.
5 Insert the radio or battery into the charging pocket
with the radio or battery facing away from the
contacts .
NOTICE:
• This Multi-Unit Charger clone up to two radios
(two Source radios and two Target radios). Refer
to Cloning with a MUC (Optional Accessory) on
page 76 for more information.
• More information on the Multi-Unit Charger
operation is available in the Instruction Sheets
provided with the MUC. For more information on
the parts and their part numbers, refer to
Chapter Accessories on page
1
Normally, re-positioning the battery pack will correct this issue.
2
Battery temperature is too warm or too cold or wrong power voltage is used.
22

DLR Series Charger LED Indicators

The following table explains the meaning of each status
and LED indicator:
Table 7: Indicators
Power On
Charging
Charged
Error
Standby
Battery Level
92.
Status
Status LED Indicator
Green for approxi-
mately one sec-
ond
Steady Red
Steady Green
1
Fast-blinking red
Slowly blinking
2
amber
Blink Red one
time
Blink Amber two
times
Comments
-
-
-
-
-
Battery low
Battery medium