Cloning With A Muc (Optional Accessory) - Motorola DLR1060 User Manual

English
Cloning with a MUC (Optional
Accessory)
To clone radios using the Multi-Unit Charger, you must
obtain at least two radios:
• a Source radio (radio from which the profiles will be
cloned or copied)
• a Target radio (radio to which the profiles will be cloned
from the source radio)
The Source radio has to be in Pocket 1, 4, 7, or 10 while
the Target radio has to be in Pocket 2, 5, 8, or 11,
matching in the MUCs pockets by pairs as follows:
- 1 and 2
- 4 and 5
- 7 and 8
- 10 and 11
MUC pockets numbers should be read from left to right
with the Motorola Solutions logo facing front.
Paired Target radios and Source radios must be of the
same band type in order for the cloning to run
successfully.
76
When cloning, the MUC does not need to be plugged
into a power source, but all radios require charged
batteries.
2 4
1 3
7
6
Label
1
2
3
4
5
5
9
8
Item
Pocket 1
"CLONE" symbol
Pocket 2
Pocket 4
Pocket 5