Sony DVS-9000SF Operation Manual page 6

DVS-9000SF Production Switcher
Processor
DVS-9000SF Production Switcher Processor main unit.
This is the main chassis unit of the DVS-9000SF
Production Switcher Processor (size EIA 4RU).
It is supplied with boards for 1 M/E banks, 17 inputs, and
12 outputs as standard equipment.
The following options may be installed to configure
different systems.
Option Name Maximum number of installable option
boards
BKDS-9162 1
BKDS-9210 1
BKDS-9470 1
MKS-8110SD 1
HK-PSU04 1
BKDS-9160 24 Output Board Set
A 24-output board set. This option is for the DVS-9000
only. One option set can be installed.
BKDS-9161 8 Monitor Output Board
An 8-output board for monitoring input signals. This
option is for the DVS-9000 only. One option board can be
installed.
BKDS-9162 12 Output Connector Board
A 12-output connector board. This option is for the DVS-
9000SF only. One option board can be installed.
BKDS-9210 Mix Effect Board
A M/E board. Depending on the configuration, up to two
option boards can be installed in a DVS-9000 system. One
option board can be installed in a DVS-9000SF system.
BKDS-9470 DME Board Set
A 4-channel DME option board set. One option set can be
installed in either the DVS-9000 or DVS-9000SF.
MKS-8110SD 17 Input Board
A 17-input board. Up to option three boards can be
installed in the DVS-9000. One option board can be
installed in the DVS-9000SF.
MKS-8111SD Additional 12 Input Board
A 12-input expansion board. This option is for the DVS-
9000 only. One option board can be installed.
When more than 68 inputs (three MKS-8110SD boards)
are required, this board can be installed to provide up to 80
inputs.
6
Overview
HK-PSU04 Power Supply Unit
A backup power supply unit. By installing one or two
backup units in the DVS-9000, or one backup unit in the
DVS-9000SF, you can back up the system's power supply.