Do you have a question about the VAC2050C and is the answer not in the manual?
Questions and answers
Lawrence Morgan
March 16, 2025
We have a Stayer Vac2050C. It will not start when plugged in. Please suggest solution.
1 comments:
Mr. Anderson
March 16, 2025
The document does not provide specific troubleshooting steps for a Stayer VAC2050C that will not start. However, based on general troubleshooting practices, you can try the following:
1. Check Power Supply – Ensure the vacuum is plugged into a working power outlet and that the mains voltage matches the voltage specified on the machine's nameplate. 2. Inspect Power Cord – Look for any visible damage or loose connections. 3. Verify Mode Selector Switch – Make sure the mode selector switch is set to "ON." 4. Check for Blockages – Ensure the vacuum is not clogged or obstructed. 5. Inspect Safety Features – Verify that all parts, such as the collecting bag and filter, are properly installed and secured. 6. Test with Another Outlet – Plug the vacuum into a different power source to rule out outlet issues. 7. Contact Customer Support – If the vacuum still does not start, refer to customer support or warranty services for further assistance.
ENGLISH 3. Instructions for use This manual is consistent with the date of manufacture of your machine, you will find information on the technical data of the machine acquired manual check for updates The unit is intended for pick-up and vacuuming of non of our machines on the website: www.grupostayer.com hazardous materials and non-flammable liquids.
ENGLISH 4. Operating instructions Dry vacuum cleaning 1. Open fasteners 10 at both sides, raise and remove the 4.1 Placement and testing upper part of the vacuum cleaner. 2. Confirm that the fluted filter 12 and the collecting bag Initial operation 11 are positioned correctly.
ENGLISH 5.3 Warranty = Sound pressurelevel. Warranty card lncluded in the documentation that accompanies this equipment, you should find the warranty card. You should = Vibration. fill out the card completely and retum to vendar with a copy of purchasing receipt or invoice and you should receive a receipt.
ENGLISH 6.2 EU declaration of conformity The undersigned: STAYER IBERICA,S.A. With address at: Calle Sierra de Cazorla, 7 Área EmpresarialAndalucra - Sector 1 28320 PINTO (MADRID) Tel.: +34 91 691 86 30 / Fax: +34 91 691 86 31 CERTIFIES...
Page 8
Área Empresarial Andalucía - Sector 1 C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com www.grupostayer.com...
Need help?
Do you have a question about the VAC2050C and is the answer not in the manual?
Questions and answers
We have a Stayer Vac2050C. It will not start when plugged in. Please suggest solution.
The document does not provide specific troubleshooting steps for a Stayer VAC2050C that will not start. However, based on general troubleshooting practices, you can try the following:
1. Check Power Supply – Ensure the vacuum is plugged into a working power outlet and that the mains voltage matches the voltage specified on the machine's nameplate.
2. Inspect Power Cord – Look for any visible damage or loose connections.
3. Verify Mode Selector Switch – Make sure the mode selector switch is set to "ON."
4. Check for Blockages – Ensure the vacuum is not clogged or obstructed.
5. Inspect Safety Features – Verify that all parts, such as the collecting bag and filter, are properly installed and secured.
6. Test with Another Outlet – Plug the vacuum into a different power source to rule out outlet issues.
7. Contact Customer Support – If the vacuum still does not start, refer to customer support or warranty services for further assistance.
This answer is automatically generated