Setting Up; Choosing The Power Sources - Sony ZS ZS-SN10L Operating Instructions Manual

Setting Up

Choosing the power sources

You can use the AC power or batteries as a power source.
3 Battery compartment
1
Connecting the mains lead
Insert one end of the supplied mains
lead to the AC IN socket located at the
rear of the player, and the other end to
the mains.
Changing the AM/MW tuning
interval
The AM/MW tuning interval is preset to
9 kHz at the factory.
If you need to change the AM/MW tuning
interval, do the following:
1 Press RADIO•BAND•AUTO PRESET
until "AM" or "MW" is displayed.
2 Press ENTER/MEMORY for 2 seconds.
3 Press RADIO•BAND•AUTO PRESET for
2 seconds.
"AM 9k" "MW 9k" or "AM 10k"
"MW 10k" flashes.
4 Press . or > to select "AM 9k"
"MW 9k" for 9 kHz interval or "AM 10k"
"MW 10k" for 10 kHz interval.
5 Press ENTER/MEMORY.
After changing the tuning interval, you need
to reset your preset AM/MW radio stations.
GB
26
AC IN
2
Inserting batteries into the remote
Insert two R03 (size AAA) batteries
(not supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.
1 to the mains