Printing real-time data
Real-time printouts are intended for archival or record-keeping purposes only. The
patient record is also stored in trend memory.
1.
Connect the printer and begin to monitor the patient.
2.
Sample printout: Real-time data
To start printing, use the ComWheel to move the pointer to the print
symbol, then press the ComWheel. Repeat to stop printing.
The print symbol is displayed during printing.
Trend Download Option
Current patient data
General information:
• Patient number and lines for
adding information.
• Legend for symbols in the STATUS
column.
• The time and date printing started,
based on monitor clock settings.
Data at 4-second intervals:
• Lowest SpO
reading and the
2
accompanying pulse rate (PR), PI r ,
and alarm status.
• Status of SpO
limit violations,
2
sensor error, and alarm silence. For
example, ?X means the sensor was
off the patient or disconnected (?)
AND alarms were silenced (X).
A–5