Table of Contents
Advertisement
Step 6: Setting the receiver IP address acquisition method
Depending on the environment in which you are using Network Media, use the following procedure to
select the method of acquiring an IP address for the receiver.
1
Press the blue MAIN MENU button.
The main menu appears.
2
Select Settings, and press the SELECT button.
The Settings screen appears.
3
to select System Settings, and then press the SELECT button.
Use
/
The System Settings screen appears.
4
Use
/
to select IP Address, and then press the SELECT button.
The IP Address screen appears.
Settings
IP Address
Obtain an IP address automatically (using router)
Obtain an IP address automatically (not using router)
Specify an IP address
Current Settings:
IP Address:
000
.
000
.
000
Subnet Mask:
000
.
000
.
000
OK
CANCEL
:Select
:Return
5
Use
/
to select the item appropriate to the environment in which you are using
Network Media, and then press the SELECT button.
• When using Network Media with a router
c Select Obtain an IP address automatically (using router).
• When using this function without a router
c Select Obtain an IP address automatically (not using router).
6
Use
/
/
/
Tip
To set the receiver IP address, see page 77.
/
/
/
SELECT
.
000
.
000
to select OK, and then press the SELECT button.
35
GB
Advertisement
Table of Contents
