Sony STR-LV700R Operating Instructions Manual page 27

Home network 4: The network cable is connected to a LAN, shared in
a residential complex
LAN
VAIO computer 1
MONITOR
To Ethernet port
USB
MIC HEADPHONES LINE IN
MONITOR
AUDIO S VIDEO/VIDEO AUDIO S VIDEO/VIDEO VHF/UHF
– VIDEO OUTPUT – – VIDEO1 INPUT –
PHONE LINE
VAIO computer 2
1)
Use a router with a built-in network switch that supports 100Base-TX.
2)
Attach the supplied ferrite core to the supplied network cable before connecting the cable to the receiver.
Notes
• Connections may vary depending on your network. Contact your Internet service provider for connection
information.
• Use equipment and cables that support 100Base-TX.
Home network 4 connection method
1
Connect the receiver to a router device with a built-in network switch (sold separately) using the
network cable (supplied) with the ferrite core (supplied).
2
Connect the Ethernet jack of each VAIO computer to jacks on the router device using additional
network cables (sold separately).
3
Connect the WAN jack on the router device to the LAN jack (residential complex).
Note
This connection method may vary depending on factors specific to your network.
Router device with a built-in network
1)
switch (sold separately)
WAN LAN
Network cable
(sold separately)
Network cable with
ferrite core
To Ethernet port
Network cable
(sold separately)
ANTENNA
To Ethernet port 75
2)
(supplied)
STR-LV700R
U
FM AM L
R
OUT IN
HDD/MD
continued
27 GB