1. Manuals
  2. Brands
  3. Z-Wave Manuals
  4. Remote Control
  5. DUW 064459
  6. Quick start manual

Z-Wave DUW 064459 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Image not readable or empty
images/manufacturers/Duewi.png
DUW_064459
Z-Wave Remote Control
Firmware Version : 0.0
Quick Start
R
This device is a Z-Wave Remote Control.
Push the "Include" button for 2 seconds to include the device into an existing the Z-Wave network. For
Inclusion of Z-Wave devices into the remote controls network press 3 times the "Inclusion" button on the
backside of the remote control and confirm by pressing the dedicated button on the target.
Please refer to the chapters below for detailed information about all aspects of the products usage.
What is Z-Wave?
This device is equipped with wireless communication complying to the Z-Wave standard. Z-Wave is the
international standard for wireless communication in smart homes and buildings. It is using the
frequency of 868.42 MHz to realize a very stable and secure communication. Each message is reconfirmed
(two-way communication) and every mains powered node can act as a repeater for other nodes (meshed
network) in case the receiver is not in direct wireless range of the transmitter.
Z-Wave differentiates between Controllers and Slaves. Slaves are either sensors (S) transmitting metered or
measured data or actuators (A) capable to execute an action. Controllers are either static mains powered
controllers (C) also referred to as gateways or mobile battery operated remote controls (R). This results in a
number of possible communication patterns within a Z-Wave network that are partly or completely supported
by a specific device.
1. Controllers control actuators
2. Actuators report change of status back to controller
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 1

Advertisement

Table of Contents
loading

Related Manuals for Z-Wave DUW 064459

Summary of Contents for Z-Wave DUW 064459

  • Page 1 This device is a Z-Wave Remote Control. Push the "Include" button for 2 seconds to include the device into an existing the Z-Wave network. For Inclusion of Z-Wave devices into the remote controls network press 3 times the "Inclusion" button on the backside of the remote control and confirm by pressing the dedicated button on the target.

  • Page 2: Product Description

    Behavior within the Z-Wave network On factory default the device does not belong to any Z-Wave network. The device needs to join an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

  • Page 3: Operating The Device

    Operating the device The DÜWI Remote Control can either built and manage its own Z-Wave network or work together with a IP- Gateway in one common network. It has 10 different button groups to control 10 different devices or groups of devices.
  • Page 4 Just re-include the remote control again to solve the problem. In this case no configuration will get lost. (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 4...

  • Page 5: Wakeup Intervals - How To Communicate With The Device

    Node Information Frame. Beside this it may be needed for certain network operations to send out a Node Information Frame. Pressing the "INCL." button for 2 seconds will send out a Node Information Frame. (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 5...

  • Page 6: Led Control

    Special Functions as Z-Wave Controller As long as this device is not included into a Z-Wave network of a different controller it is able to manage its own Z-Wave network as primary controller. As a primary controller the device can include and exclude other devices in its own network, manage associations, and reorganize the network in case of problems.
  • Page 7 Send out a NIF with the primary device which should trigger the action. Send out a NIF with the secondary device which should be controlled. Update Network Information (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 7...

  • Page 8: Reset The Controller

    Command Classes Supported Command Classes Basic (version 1) Alarm (version 1) Manufacturer Specific (version 1) Controlled Command Classes Alarm (version 1) Technical Data (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 8...

  • Page 9: Explanation Of Z-Wave Specific Terms

    Exclusion — is the process of removing Z-Wave devices from the network. Association — is a control relationship between a controlling device and a controlled device. Wakeup Notification — is a special wireless message issued by a Z-Wave device to annonces that is is able to communicate.

Table of Contents